Where Can I Get Free Cisco 200-105 Dumps? Itexamcourses shares the latest and effective Cisco 200-105 exam questions and answers, online practice tests, and the most authoritative Cisco exam experts update 200-105 exam questions throughout the year. Get the full 200-105 exam dumps selection: https://www.leads4pass.com/200-105.html (709 Q&As). Pass the exam with ease!

Table of Contents:

• Latest Cisco 200-105 google drive
• Effective Cisco 200-105 exam practice questions
• Related 200-105 Popular Exam resources
• Lead4Pass Year-round Discount Code
• What are the advantages of Lead4pass?

Latest Cisco 200-105 google drive

^[PDF] Free Cisco 200-105 pdf dumps download from Google Drive: https://drive.google.com/open?id=12i4PQcOM_wViErLantss1O0KK0B4_1L3

200-105 ICND2 – Cisco: https://www.cisco.com/c/en/us/training-events/training-certifications/exams/current-list/200-105-icnd2.html

This exam tests a candidate’s knowledge and skills related to LAN switching technologies, IPv4 and IPv6 routing technologies, WAN technologies, infrastructure services, and infrastructure maintenance.

Last date to test: February 23, 2020
The 200-105 ICND2 exam will be retired on February 23, 2020.

New Cisco Exams

cisco latest network system 2020 update: https://www.dumpinside.com/cisco-latest-network-system-2020-update/

200-301 CCNA – Cisco: https://www.cisco.com/c/en/us/training-events/training-certifications/exams/current-list/ccna-200-301.html

lead4pass 200-301 exam dumps: Cisco Certified Network Associate

Latest updates Cisco 200-105 exam practice questions

QUESTION 1
In an HSRP failover environment, which two tasks must you perform on the preferred active router so that it always
assumes the active role when it comes up? (Choose two.)
A. Configure the router with a higher priority than the other routers in the group
B. Configure the router with a higher MAC address than the other routers in the group
C. Configure preemption on the router
D. Configure the router with a higher IP address than the other routers in the group
E. Configure tracking on the router
Correct Answer: AC

QUESTION 2
DRAG DROP
Two EIGRP routers have failed to establish a neighbor relationship. Drag and drop the configuration parameters from
the left onto the categories on the right.
Select and Place:

Correct Answer:

QUESTION 3
Which three effects of using local SPAN are true? (Choose three.)
A. It doubles the load on the forwarding engine.
B. It prevents SPAN destinations from using port security.
C. It doubles internal switch traffic.
D. It reduces the supervisor engine workload by half.
E. it reduces the load on the switch fabric.
Correct Answer: ABC
To avoid disrupting traffic, do not oversubscribe any of these points in your SPAN topology. Some oversubscription and
performance considerations are: ?SPAN doubles traffic internally ?SPAN adds to the traffic being processed by the
switch fabric ?SPAN doubles forwarding engine load
Because SPAN destination ports drop ingress traffic, these features are incompatible with SPAN destination ports:
?Private VLANs ?IEEE 802.1X port-based authentication ?Port security
Reference: https://www.cisco.com/c/en/us/td/docs/routers/7600/ios/12-2SXF/configuration/guide/swcg/span.pdf

QUESTION 4
What are the two default metrics used by EIGRP for route selection? (Choose two.)
A. Bandwidth
B. Delay
C. Reliability
D. Load
E. MTU
Correct Answer: AB
EIGRP adds together weighted values of different network link characteristics in order to calculate a metric for
evaluating path selection.
These characteristics include:
Delay (measured in 10s of microseconds)
Bandwidth (measured in kilobytes per second)
Reliability (in numbers ranging from 1 to 255; 255 being the most reliable) Load (in numbers ranging from 1 to 255; 255
being saturated) Various constants (K 1 through K 5) are able to be set by a user to produce varying routing behaviors.
However, by default, only delay and bandwidth are used in the weighted formula to produce a single 32bit metric:

Note: Default K values are: K1 = K3 = 1 and K2 = K4 = K5 = 0. When K5 is equal to 0 then [K5/( K4 + reliability)] is
defined to be 1 Use of the default constants effectively reduces the formula above to:
Reference: http://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/enhanced-interior-gateway-routing-protocol-eigrp/whitepaper_C11-720525.html

QUESTION 5
Which statements are true about EIGRP successor routes? (Choose two.)
A. A successor route is used by EIGRP to forward traffic to a destination.
B. Successor routes are saved in the topology table to be used if the primary route fails.
C. Successor routes are flagged as \\’active\\’ in the routing table.
D. A successor route may be backed up by a feasible successor route.
E. Successor routes are stored in the neighbor table following the discovery process.
Correct Answer: AD
Introduction to EIGRP Feasible Successors A destination entry is moved from the topology table to the routing table
when there is a feasible successor. All minimum cost paths to the destination form a set. From this set, the neighbors
that have an advertised metric less than the current routing table metric are considered feasible successors. Feasible
successors are viewed by a router as neighbors that are downstream with respect to the destination. These neighbors
and the associated metrics are placed in the forwarding table. When a neighbor changes the metric it has been
advertising or a topology change occurs in the network, the set of feasible successors may have to be reevaluated.
However, this is not categorized as a route recomputation.
Reference: http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080093f07.shtml

QUESTION 6
When are packets processed by an inbound access list?
A. before they are routed to an outbound interface
B. after they are routed to an outbound interface
C. before and after they are routed to an outbound interface
D. after they are routed to an outbound interface but before being placed in the outbound queue
Correct Answer: A

QUESTION 7
Which spanning-tree feature places a port immediately into a forwarding state?
A. BPDU guard
B. PortFast
C. loop guard
D. UDLD
E. UplinkFast
Correct Answer: B
PortFast causes a switch or trunk port to enter the spanning tree forwarding state immediately, bypassing the listening
and learning states. You can use PortFast on switch or trunk ports that are connected to a single workstation, switch, or
server to allow those devices to connect to the network immediately, instead of waiting for the port to transition from the
listening and learning states to the forwarding state.

QUESTION 8
What\\’s DTP\\’s default in a switch?
A. ON
B. OFF
C. Dynamic Desirable
D. Dynamic Auto
Correct Answer: D

QUESTION 9
Which two characteristics of extended access lists are true? (Choose two.)
A. They can compare source traffic only against a permit or deny statement
B. They must be identified with a number between 100 and 199 or 2000 and 2699
C. They can be identified only with a number between 100 and 199
D. They can be configured to filter only UDP or TCP traffic
E. They can compare source and destination traffic against a permit or deny statement
Correct Answer: BE

QUESTION 10
Which two features are supported only in named access lists? (Choose two.)
A. identifying QoS traffic for marking
B. filtering traffic on VTY lines
C. limiting debug output
D. noncontiguous port filtering
E. deleting entries
Correct Answer: DE
Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_data_acl/configuration/xe-3s/sec-data-acl-xe-3s-book/sec-acl-named.pdf

QUESTION 11
Refer to the exhibit. Host A pings interface S0/0 on router 3.
What is the TTL value for that ping?

A. 252
B. 253
C. 254
D. 255
Correct Answer: B
From the CCNA ICND2 Exam book: “Routers decrement the TTL by 1 every time they forward a packet; if a router
decrements the TTL to 0, it throws away the packet. This prevents packets from rotating forever.” I want to make it clear
that before the router forwards a packet, the TTL is still remain the same. For example, in the topology above, pings to
S0/1 and S0/0 of Router 2 have the same TTL. The picture below shows TTL values for each interface of each router
and for HostB. Notice that Host A initializes ICMP packet with a TTL of 255:

QUESTION 12
Which option is the benefit of implementing an intelligent DNS for a cloud computing solution?
A. It reduces the need for a backup data center.
B. It can redirect user requests to locations that are using fewer network resources.
C. It enables the ISP to maintain DNS records automatically.
D. It eliminates the need for a GSS.
Correct Answer: B

QUESTION 13
A network administrator needs to allow only one Telnet connection to a router. For anyone viewing the configuration and
issuing the show run command, the password for Telnet access should be encrypted.
Which set of commands will accomplish this task?
A. service password-encryption access-list permit 192.168.1.0.0.0.0.255 line vty0 4 login password cisco access-class
1
B. enable password secret line vty0 login password cisco
C. service password-encryption line vty0 login password cisco
D. service password-encryption line vty0 4 login password cisco
Correct Answer: C

Related 200-105 Popular Exam resources

Lead4Pass Year-round Discount Code

What are the advantages of Lead4pass?

Lead4pass employs the most authoritative exams from Cisco, Microsoft, CompTIA, Citrix, EMC, etc. We update exam data throughout the year. Highest pass rate! We have a large user base. We are an industry leader!
Choose Lead4Pass to pass the exam with ease!

Summarize:

It’s not easy to pass the Cisco 200-105 exam, but with accurate learning materials and proper practice, you can crack the exam with excellent results. https://www.leads4pass.com/200-105.html provides you with the most relevant learning materials that you can use to help you prepare.