Free share some of the latest VMware IT certification exam questions, brain dumps, exam PDF, exam practice questions, and Cisco, Microsoft, CompTIA, Citrix… Advanced dumps

Effectively update VMware (Data Center Virtualization,Network Virtualization,Cloud Management and Automation,End-User Computing,Application Modernization) Exam questions, exam PDF, exam dumps with PDF and VCE from Lead4Pass

New 5V0-22.21 Dumps Questions [2022] Best material for VMware vSAN 6.7 Expert Exam

New 5V0-22.21 Dumps Questions

The new 5V0-22.21 Dumps Questions are the best exam material to better prepare for the VMware vSAN 6.7 Specialist certification exam.
Our team of VMware experts has developed truly effective 5V0-22.21 Dumps exam questions and answers based on the exam details of the VMware vSAN 6.7 Specialist Certification Exam Designing, Implementing, and Managing VMware vSAN Environments.
Verified and reviewed 5V0-22.21 Dumps exam questions can help you successfully pass the VMware vSAN 6.7 Specialist exams on the first try. Lead4Pass offers a 100% guarantee on the newly updated 5V0-22.21 Dumps questions.
This will help you get VMware vSAN 6.7 Specialist Certificate (5V0-22.21) certification.

Check 5V0-22.21 Free Dumps To Verify The New 5V0-22.21 Dumps Questions

QUESTION 1

An administrator has discovered that space utilized by VMs does not decrease after deleting files and folders within the VMs. The administrator needs to be able to reclaim this space.
Which action could the administrator take to accomplish this task?

A. Disable Storage I/O Control for the vSAN cluster.
B. Reboot the VM to recreate the swap file.
C. Set the Object Space Reservation rule to 100%.
D. Enable TRIM/UNMAP for the vSAN cluster.

Correct Answer: D

QUESTION 2

After a server power failure, the administrator noticed the scheduled resyncing in the cluster monitor displays objects to be resynchronized under the pending category.
What are these objects in this category?

A. These objects belong to virtual machines, which are powered off.
B. Object resynchronization must be started manually.
C. There is too many objects to be synchronized.
D. The delay timer has not expired.

Correct Answer: B

QUESTION 3

A site administrator has determined that the site needs to upgrade all vSAN clusters to 7.0 U1. The vSAN administrator wishes to complete the update in the shortest amount of time possible. All virtual machines are assigned a storage policy where the “Failures to tolerate” is set to one or higher.
Which strategy should be used to achieve this goal?

A. Disable de-duplication and compression prior to the upgrade.
B. Perform a complete update, omitting the on-disk format update.
C. Select the “No data migration” maintenance mode option.
D. Update only select, mission-critical clusters.

Correct Answer: D

QUESTION 4

During yesterday\’s business hours, a cache drive failed on one of the vSAN nodes. The administrator reached out to the manufacturer and received a replacement drive the following day. When the drive failed, vSAN started a resync to ensure the health of data, and all objects are showing a healthy and compliant state. The vSAN administrator needs to replace the failed cache drive.
Which set of steps should the vSAN administrator take?

A. Remove the existing vSAN disk group, and physically replace the device. Then, check to verify that the ESXi host automatically detects the new device. Afterward, manually recreate the Disk Group.

B. Physically replace the failed cache device, and vSAN will automatically create a new disk group. Then, remove the disk group with the failed device.

C. Physically replace the failed cache device, and vSAN will automatically allocate the storage. Then, rebalance the cache layer.

D. Place the disk group into maintenance mode, and select Full Data Migration. Then, physically replace the failed cache device. Afterward, vSAN will rebuild the disk group automatically.

Correct Answer: B

QUESTION 5

After a recent data loss event, the IT department plans to deploy a DR site using vSphere Replication with vSAN providing the storage backend.
The architect would like to know how many components will be created based on the following configuration:
2x 100 GB VMDK RAID 1 vSAN Storage Policy 4x Point in Time snapshots
How many components will be created?

A. 32
B. 24
C. 16
D. 8

Correct Answer: B

QUESTION 6

What are two purposes of a vSAN storage policy (Choose two.)

A. To determine the vSAN encryption level
B. To enable TRIM/UNMAP

C. To define how the VM storage objects are provisioned
D. To guarantee the required level of service
E. To enable deduplication and compression

Correct Answer: CD

QUESTION 7

A single capacity disk fails within a vSAN 7.0 U1 cluster running with a “compression-only” configuration enabled. The vSAN administrator must recognize the platform impact that has occurred and take steps to correct it.
Which action should the vSAN administrator take?

A. The hardware failure will impact the entire disk group, so the vSAN administrator will need to remove and recreate the disk group following the replacement of the failed storage device.

B. The hardware failure will stop the running workloads, so the vSAN administrator will need to disable the compression-only configuration, replace the failed capacity device, and then re-create the disk group.

C. The hardware failure will impact all disk groups within the ESXi host, so the vSAN administrator will need to manually remove the ESXi node from the vSAN Cluster, replace the failed capacity device, and then re-create the disk group.

D. The hardware failure will only impact the specific capacity disk, so the vSAN administrator will need to remove and replace the failed capacity device.

Correct Answer: D

QUESTION 8

A 100GB virtual disk object has this storage policy assigned to it:
Site disaster tolerance: None – standard cluster Failures to Tolerate: 1 failure – RAID-1 (Mirroring) Number of disk stripes per object: 3
What is the maximum amount of raw vSAN storage capacity consumed by this virtual disk?

A. 200GB
B. 100GB
C. 300GB
D. 600GB

Correct Answer: B

QUESTION 9

Which option, if any, is the default option to Enable Maintenance Mode on a vSAN host?

A. Ensure accessibility.
B. No data migration.
C. Full data migration.
D. There is no default option. The administrator must select an option.

Correct Answer: D

QUESTION 10

Which two prerequisites are required before a vSAN administrator is able to use the vSAN Performance Diagnostics feature? (Choose two.)

A. The vSAN Performance Service must be enabled.
B. The vSAN Health Service must be turned on.
C. vSAN File Services must be disabled before running vSAN Performance Diagnostics.
D. Participation in the Customer Experience Improvement Program (CEIP) must be enabled.
E. Verbose Mode must be enabled when configuring vSAN monitoring.

Correct Answer: AB

QUESTION 11

An organization is facing vSAN storage capacity challenges on one of their vSAN enabled clusters, while other vSAN enabled clusters are underutilized. The current vSAN version is 7.0 U1.
Which vSAN feature should be used to resolve this challenge in the quickest way?

A. vSAN HCI Mesh
B. vSAN Replication
C. vSAN Stretched Clusters
D. vSAN Datastore(s)

Correct Answer: A

QUESTION 12

An administrator wants to check the vSAN cluster health during the maintenance window while the vCenter Server is offline.
What are two ways to complete this task? (Choose two.)

A. HCIBench
B. ESXi system logs on vSAN datastore
C. esxcli
D. vSphere Host Client
E. esxtop

Correct Answer: CD

……


5V0-22.21 Free Dumps Online Download:https://drive.google.com/file/d/15YWkqdIMSodSz9RdahWzabztZLX5CqwQ/view?usp=sharing

Lead4Pass 5V0-22.21 Dumps Questions Specifically designed to correspond to the exam details of the VMware vSAN 6.7 Specialist Certification Exam Designing, Implementing, and Administering VMware vSAN Environments Formulated with really valid 5V0-22.21 Dumps exam questions and answers.
Use the new 5V0-22.21 Dumps: https://www.lead4pass.com/5v0-22-21.html. Helping you pass the VMware vSAN 6.7 Specialist certification exam with ease.

Comments are Closed