Latest Lead4pass IT Exam Dumps Free Update

Download Free Latest Microsoft, Cisco, CompTIA And Other IT Exam Dumps Questions And Answers

CCNP Wireless

now browsing by category

 

Cisco CCNP Wireless 300-365 exam exercise questions, 300-365 dumps easy to prepare for passing exams

Deploying Cisco Wireless Enterprise Networks (WIDEPLOY)” Exam 300-365. Here you can get the latest free 300-365 exam exercise questions and answers for free and easily improve your skills!

300-365 exam

This exam tests a candidate’s knowledge of implementing wireless networks based on the applicable Cisco controller and Unified switching architectures that support high availability, QoS, multicast, and mobility services. Follow the link to find more information about https://www.lead4pass.com/300-365.html exam.

Watch the Cisco CCNP Wireless 300-365 video tutorial online

Table of Contents:

Latest Cisco CCNP Wireless 300-365 pdf

[PDF] Free Cisco CCNP Wireless 300-365 pdf dumps download from Google Drive: https://drive.google.com/open?id=1QE2kYGjwbn-IwAfHXsfrHkAp3qhEoFYw

300-365 WIDEPLOY – Cisco:https://www.cisco.com/c/en/us/training-events/training-certifications/exams/current-list/wideploy.html

Free Cisco CCNP Wireless 300-365 Exam Practice Questions

QUESTION 1

What is the default NMSP echo interval between a Mobility Services Engine and Wireless LAN Controller? 

A. 30 Seconds 

B. 15 Seconds 

C. 10 Seconds 

D. 60 Seconds 

Correct Answer: B 

http://www.cisco.com/en/US/docs/wireless/mse/3350/6.0/CAS/configuration/guide/msecg_ch4_CAS.html 

 

QUESTION 2

A customer has limited staff to manage a wireless network. The customer wants a solution that requires minimum

hardware. Which type of architecture do you propose? 

A. centralized 

B. distributed 

C. cloud-based 

D. unified 

Correct Answer: A 

 

QUESTION 3

A customer called into the support center with a problem ticket that involves wireless clients having to reauthenticate

when they are walking around their office. After further investigation, it was discovered that the customer has two

controllers in an N+1 deployment. Which action must the engineer take to troubleshoot the issue? 

A. Verify that the wireless controllers are in the same mobility group and that the access points are all on the primary

controller. 

B. Under the SSID, make sure that 802.11r is configured and running for the clients. 

C. Make sure that the SSID has the authentication set to 802.1x with Cisco Centralized Key Management so the data

clients can roam seamlessly. 

D. Verify the access points are spread out between the primary and secondary controller and that the controllers are in

the same mobility group. 

Correct Answer: D 

 

QUESTION 4

A customer wants to restrict the number of SSIDs being offered in a specific location, but with a single WLC enterprise

wide. The customer is enabled to delete the SSIDs globally without impacting users at other sites. Which action fulfills

this requirement? 

A. Configure a FlexConnect group for the specified location and add the location APs to the group. 

B. Add an AP group for the specified location and add the location APs to the group. 

C. Change the WLAN ID of the desired SSIDs to greater than 16 and then disable them. 

D. Apply an access control list to restrict access at the specified location. 

Correct Answer: B 

 

QUESTION 5

A customer is implementing a massively scaled guest wireless network to support approximately 32,000 clients. For

ease of administration, they have required implementing multiple interfaces defined on the WLC and mapped to a single

interface group. Which configuration meets this need? 

A. 264 interfaces of /25 sized networks 

B. 132 interfaces of /24 sized networks 

C. 66 interfaces of /23 sized networks 

D. 33 interfaces of /22 sized networks 

Correct Answer: D 

References: http://www.cisco.com/c/en/us/support/docs/wireless/8500-series-wireless-controllers/113695-8500-dg-00.html 

 

QUESTION 6

Branch wireless users report that they can no longer access services from head office but can access services locally at

the site. New wireless users can associate to the wireless while the WAN is down. Which three options (Cisco

FlexConnect state, operation mode, and authentication method) are seen in this scenario? (Choose three.) 

A. authentication-central/switch-local 

B. standalone mode 

C. authentication-central/switch-central 

D. WPA2 personal 

E. authentication-local/switch-local 

F. WPA2 enterprise 

Correct Answer: BDE 

 

QUESTION 7

What devices can be tracked with the Cisco Context Aware Services? 

A. Only wired devices. 

B. Both wired and wireless devices. 

C. Only Cisco certified wireless devices. 

D. Only wireless devices. 

Correct Answer: B 

 

QUESTION 8

On which AP radio or radios is Cisco WGB association and public safety supported? 

A. 5 GHz only 

B. 2.4 GHz only 

C. 2.4, 5, or 4.9 GHz 

D. 2.4 or 5 GHz only 

Correct Answer: C 

 

QUESTION 9

CMX Facebook WiFi can allow access to the network before authentication. Which two of the following options are

available? (Choose two) 

A. Allow all the traffic before authentication and intercept HTTPs only. 

B. Allow HTTP traffic only before authentication and block all the traffic. 

C. Allow SNMP traffic only before authentication and block all the traffic. 

D. Allow all the traffic before authentication and intercept HTTP only. 

E. Allow HTTPs traffic only before authentication and block all other traffic. 

Correct Answer: BD 

 

QUESTION 10

An engineer needs to address roaming issues with sticky clients in high-density areas on a campus. Which feature must

the engineer configure? 

A. Layer 3 roaming 

B. load balancing and band select 

C. optimized roaming 

D. Layer 2 roaming 

Correct Answer: D 

 

QUESTION 11

A network engineer is debugging issues with the mDNS gateway. Which type of reply should be seen in the Wireshark

capture when querying for a mDNS service in the Bonjour Cache? 

A. unicast from Prime Infrastructure 

B. unicast from controller 

C. multicast from devices 

D. multicast from controller 

E. unicast from devices 

F. multicast from Prime Infrastructure 

Correct Answer: B 

References: http://www.cisco.com/c/en/us/td/docs/wireless/technology/bonjour/Bonjour74/Bonjour_Deployment.html 

 

QUESTION 12

An engineer must implement WLC features that enhance roaming. Which two technologies fulfill this requirement?

(Choose two.) 

A. 802.11v 

B. WPA2 

C. Cisco Centralized Key Management 

D. 802.1X 

E. 802.11r 

Correct Answer: AE 

 

QUESTION 13

Which two parameters must be considered when conducting an outdoor mesh site survey? (Choose two.) 

A. weather 

B. traffic lights 

C. throughput 

D. Fresnel zone 

E. near-far effect 

Correct Answer: AD 

Related 300-365 Popular Exam resources

titlepdf youtube Cisco CCNP Wireless lead4pass Lead4Pass Total Questions
Cisco CCNP Wireless lead4pass 300-365 dumps pdf lead4pass 300-365 youtube 300-365 WIDEPLOY – Cisco https://www.lead4pass.com/300-365.html 144 Q&A
lead4pass 300-360 dumps pdf lead4pass 300-360 youtube 300-360 WIDESIGN – Cisco https://www.lead4pass.com/300-360.html 209 Q&A
lead4pass 300-370 dumps pdf lead4pass 300-370 youtube 300-370 WITSHOOT – Cisco https://www.lead4pass.com/300-370.html 104 Q&A
lead4pass 300-375 dumps pdf lead4pass 300-375 youtube 300-375 WISECURE – Cisco https://www.lead4pass.com/300-375.html 125 Q&A

Get Lead4Pass Coupons(12% OFF)

lead4pass coupon

What are the advantages of Lead4pass?

Lead4pass employs the most authoritative exam specialists from Cisco, Microsoft, IBM, CompTIA, etc.
We update exam data throughout the year. Highest pass rate! We have a large user base. We are an industry leader! Choose Lead4Pass to pass the exam with ease!

why lead4pass

Summarize:

It’s not easy to pass the Cisco CCNP Wireless exam, but with accurate learning materials and proper practice, you can crack the exam with excellent results. Lead4pass provides you with the most relevant learning materials that you can use to help you prepare.