Cisco 300-710 Exam Dumps
now browsing by category
Latest Updated CCNP Security 300-710 Dumps Helps Candidates Pass 300-710 SNCF Exam
The latest updated CCNP Security 300-710 dumps with PDF files and VCE exam engine, containing 238 exam questions and answers, serve all 300-710 SNCF exam candidates to help them successfully pass the exam.
You are welcome to download the latest updated 300-710 dumps: https://www.leads4pass.com/300-710.html, you will also enjoy 365 days of free updates and a 15% discount with discount code “Cisco”.
Download a free 2022 CCNP Security 300-710 dumps PDF online:
https://drive.google.com/file/d/1sLK7jCo14ta8pkXWtVqYxhJW4G6on4pR/
https://drive.google.com/file/d/1_G338eMZrcF7kcR-pWV1IiAzaXe6Vp52/
Free sharing of 15 CCNP Security 300-710 Dumps exam questions and answers:
New Question 1:
DRAG DROP
Drag and drop the steps to restore an automatic device registration failure on the standby Cisco FMC from the left into the correct order on the right. Not all options are used.
Select and Place:
Correct Answer:
New Question 2:
What is the result of enabling Cisco FTD clustering?
A. For the dynamic routing feature, if the master unit fails, the newly elected master unit maintains all existing connections.
B. Integrated Routing and Bridging are supported on the master unit.
C. Site-to-site VPN functionality is limited to the master unit, and all VPN connections are dropped if the master unit fails.
D. All Firepower appliances can support Cisco FTD clustering.
Correct Answer: C
New Question 3:
Which two conditions are necessary for high availability to function between two Cisco FTD devices? (Choose two.)
A. The units must be the same version
B. Both devices can be part of a different group that must be in the same domain when configured within the FMC.
C. The units must be different models if they are part of the same series.
D. The units must be configured only for firewall routed mode.
E. The units must be the same model.
Correct Answer: AE
New Question 4:
On the advanced tab under inline set properties, which allows interfaces to emulate a passive interface?
A. transparent inline mode
B. TAP mode
C. strict TCP enforcement
D. propagate link state
Correct Answer: D
New Question 5:
What are the minimum requirements to deploy a managed device inline?
A. inline interfaces, security zones, MTU, and mode
B. passive interface, MTU, and mode
C. inline interfaces, MTU, and mode
D. passive interface, security zone, MTU, and mode
Correct Answer: C
New Question 6:
What is the difference between an inline and inline tap on Cisco Firepower?
A. Inline tap mode can send a copy of the traffic to another device.
B. Inline tap mode does full packet capture.
C. Inline mode cannot do SSL decryption.
D. Inline mode can drop malicious traffic.
Correct Answer: A
New Question 7:
With Cisco Firepower Threat Defense software, which interface mode must be configured to passively receive traffic that passes through the appliance?
A. inline set
B. passive
C. routed
D. inline tap
Correct Answer: B
New Question 8:
Which two deployment types support high availability? (Choose two.)
A. transparent
B. routed
C. clustered
D. intra-chassis multi-instance
E. virtual appliance in public cloud
Correct Answer: AB
New Question 9:
Which protocol establishes network redundancy in a switched Firepower device deployment?
A. STP
B. HSRP
C. GLBP
D. VRRP
Correct Answer: A
New Question 10:
Which interface type allows packets to be dropped?
A. passive
B. inline
C. ERSPAN
D. TAP
Correct Answer: B
New Question 11:
Which Cisco Firepower Threat Defense, which two interface settings are required when configuring a routed interface? (Choose two.)
A. Redundant Interface
B. EtherChannel
C. Speed
D. Media Type
E. Duplex
Correct Answer: CE
New Question 12:
Which two dynamic routing protocols are supported in Firepower Threat Defense without using FlexConfig? (Choose two.)
A. EIGRP
B. OSPF
C. static routing
D. IS-IS
E. BGP
Correct Answer: BE
New Question 13:
Which policy rule is included in the deployment of a local DMZ during the initial deployment of a Cisco NGFW through the Cisco FMC GUI?
A. a default DMZ policy for which only a user can change the IP addresses.
B. deny IP any
C. no policy rule is included
D. permit IP any
Correct Answer: C
New Question 14:
What are two application layer preprocessors? (Choose two.)
A. CIFS
B. IMAP
C. SSL
D. DNP3
E. ICMP
Correct Answer: BC
New Question 15:
Which two OSPF routing features are configured in Cisco FMC and propagated to Cisco FTD? (Choose two.)
A. OSPFv2 with IPv6 capabilities
B. virtual links
C. SHA authentication to OSPF packets
D. area boundary router type 1 LSA filtering
E. MD5 authentication to OSPF packets
Correct Answer: BE
Download a free 2022 CCNP Security 300-710 dumps PDF online:
https://drive.google.com/file/d/1sLK7jCo14ta8pkXWtVqYxhJW4G6on4pR/
https://drive.google.com/file/d/1_G338eMZrcF7kcR-pWV1IiAzaXe6Vp52/
Here candidates can enjoy free CCNP Security 300-710 exam questions and answers and free PDF downloads, which are historical exam questions to help you grow your experience. Welcome to the new 300-710 SNCF exam, download Lead4Pass 300-710 dumps: https://www.leads4pass.com/300-710.html, to help you successfully pass the exam and achieve a career leap.
More IT certification blogs: [Amazon]awsexamdumps.com, [Oracle]oraclefreedumps.com, [Cisco]Ciscofreedumps.com, [Microsoft]examdumpsbase.com, [Citrix]citrixexamdumps.com
[CompTIA]comptiafreedumps.com, [VMware]vmwarefreedumps.com, [IBM]ibmexamdumps.com, [HP]hpexamdumps.com, [NetApp]NetAppexamdumps.com, [Juniper]juniperexamdumps.com
[Fortinet] fortinetexamdumps.com