Free share some of the latest VMware IT certification exam questions, brain dumps, exam PDF, exam practice questions, and Cisco, Microsoft, CompTIA, Citrix… Advanced dumps

Effectively update VMware (Data Center Virtualization,Network Virtualization,Cloud Management and Automation,End-User Computing,Application Modernization) Exam questions, exam PDF, exam dumps with PDF and VCE from Leads4Pass

November, 2022

now browsing by month

 

Get Live update CCNP Enterprise 350-401 dumps with PDF and VCE

CCNP Enterprise 350-401 dumps

Live update CCNP Enterprise 350-401 dumps with PDF and VCE from Lead4Pass, get real valid 350-401 dumps https://www.leads4pass.com/350-401.html (866 Q&A).
Provide 365 days of free updates and online customer service to ensure that 350-401 ENCOR exam candidates save more costs and pass the exam successfully.

And, provide a part of Lead4Pass 350-401 dumps PDF online download: https://drive.google.com/file/d/14FtbIb6_G2tGECN_fvyVIxB7I8VqpH8r/

Read free CCNP Enterprise 350-401 dumps exam questions and answers online:

New Question 1:

If a client\’s radio device receives a signal strength of -67 dBm and the noise floor is -85 dBm, what is the SNR value?

A. 15 dB

B. 16 dB

C. 18 dB

D. 20 dB

Correct Answer: C


New Question 2:

Refer to the exhibit.

new 350-401 dumps questions 2

An engineer must allow R1 to advertise the 192 168.1 0/24 network to R2 R1 must perform this action without sending OSPF packets to SW1 Which command set should be applied?

new 350-401 dumps questions 2-1

A. Option A

B. Option B

C. Option C

Correct Answer: B


New Question 3:

Which method creates an EEM applet policy that is registered with EEM and runs on demand or manually?

A. event manager applet OnDemand event register action 1.0 Syslog priority critical msg \’ This is a message from ondemand\’

B. event manager applet OnDemand event manual action 1.0 Syslog priority critical msg \’This is a message from ondemand\’

C. event manager applet OnDemand event none action 1.0 Syslog priority critical msg \’This is a message from ondemand\’

D. event manager applet ondemand action 1.0 Syslog priority critical msg \’ This is a message from ondemand\’

Correct Answer: C

An EEM policy is an entity that defines an event and the actions to be taken when that event occurs. There are two types of EEM policies: an applet or a script.

An applet is a simple form of policy that is defined within the CLI configuration. answer \’ event manager applet OnDemand event register action 1.0 Syslog priority critical msg `This is a message from ondemand\’ <=” p=” style=”box-sizing: border-box;”> There are two ways to manually run an EEM policy.

EEM usually schedules and runs policies on the basis of an event specification that is contained within the policy itself.

The event no command allows EEM to identify an EEM policy that can be manually triggered.

To run the policy, use either the action policy command in applet configuration mode or the event manager run command in privileged EXEC mode.

Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/eem/configuration/xe-3s/eem-xe-3s-book/eem-policy-cli.html


New Question 4:

Which action is performed by Link Management Protocol In a Cisco StackWise Virtual domain?

A. it determines if the hardware Is compatible to form the StackWise Virtual domain.

B. It determines which switch becomes active or standby.

C. It discovers the StackWise domain and brings up SVL interfaces.

D. It rejects any unidirectional link traffic forwarding.

Correct Answer: B

The Link Management Protocol (LMP) performs the following functions: + Verifies link integrity by establishing bidirectional traffic forwarding, and rejects any unidirectional links + Exchanges periodic hellos to monitor and maintain the health of the links + Negotiates the version of StackWise Virtual header between the switches StackWise Virtual link role resolution

Reference: https://www.cisco.com/c/en/us/ products/collateral/switches/catalyst-9000/nb-06-cat-9k-stackwp-cte-en.html


New Question 5:

A Cisco DNA Center REST API sends a PUT to the /DNA/intent/API/v1/network-device endpoint A response code of 504 is received What does the code indicate?

A. The response timed out based on a configured interval

B. The user does not have the authorization to access this endpoint.

C. The username and password are not correct

D. The web server is not available

Correct Answer: A


New Question 6:

Refer to the exhibit.

new 350-401 dumps questions 6

Which command set is needed to configure and verify router R3 to measure the response time from router R3 to the file server located in the data center?

A. IP SLA 6 ICMP-echo 10.0.1.3 source-IP 10.0.0.3

frequency 300

IP SLA schedule 6 life forever start-time now

show IP SLA statistics 6

B. IP SLA 6 ICMP-echo 172.29.139.134 source-IP 172.29.139.132 frequency 300 ip sla schedule 6 start-time now

C. IP SLA 6 ICMP-echo 172.29.139.134 source-IP 172.29.139.132 frequency 300 ip sla schedule 6 Start-time now shows IP protocol

D. IP SLA 6 ICMP-echo 10.0.1.3 source-IP 10.0.0.3 frequency 300 ip sla schedule 6 life forever start-time now show IP protocol

Correct Answer: A

https://www.cisco.com/c/en/us/support/docs/smb/switches/cisco-550x-series-stackable-managedswitches/smb57


New Question 7:

Refer to the exhibit. An engineer must permit traffic from these networks and block all other traffic An informational log message should be triggered when traffic enters from these prefixes Which access list must be used?

new 350-701 dumps 7

A. access-list acl_subnets permit IP 10.0.32.0 0 0.0.255 log

B. access-list acl_subn*ls permit IP 10.0.32.0 0.0.7.255 log

C. access-list acl_subnets permit IP 10.0.32.0 0.0.7.255 access-list acl_subnets deny IP any log

D. access-list acl_subnets permit IP 10.0.32.0 255.255.248.0 log

Correct Answer: B


New Question 8:

DRAG DROP

Drag and drop the tools from the left onto the agent types on the right.

Select and Place:

new 350-401 dumps questions 8

Correct Answer:

new 350-401 dumps questions 8-1

New Question 9:

Which method should an engineer use to deal with a long-standing contention issue between any two VMs on the same host?

A. Adjust the resource reservation limits

B. Live migrate the VM to another host

C. Reset the VM

D. Reset the host

Correct Answer: A


New Question 10:

DRAG DROP

Drag and drop the descriptions from the left onto the QoS components on the right.

Select and Place:

new 350-401 dumps questions 10

Correct Answer:

new 350-401 dumps questions 10-1

New Question 11:

Which access point mode allows a supported AP to function like a WLAN client would, associating and identifying client connectivity issues?

A. client mode

B. SE-connect mode

C. sensor mode

D. sniffer mode

Correct Answer: C

As these wireless networks grow especially in remote facilities where IT professionals may not always be on-site, it becomes even more important to be able to quickly identify and resolve potential connectivity issues ideally before the users complain or notice connectivity degradation.

To address these issues we have created Cisco\’s Wireless Service Assurance and a new AP mode called “sensor” mode.

Cisco\’s Wireless Service Assurance platform has three components, namely, Wireless PerformanceAnalytics, Real-time Client Troubleshooting, and Proactive Health Assessment.

Using a supported AP-ordedicated sensor the device can actually function much like a WLAN client would associating and identifying client connectivity issues within the network in real time without requiring an IT or technician to be on site.

Reference: https://content.cisco.com/chapter.sjs?uri=/searchable/chapter/content/dam/en/us/td/docs/wireless/ controller/technotes/8-5/b_Cisco_Aironet_Sensor_Deployment_Guide.html.xml


New Question 12:

What is the function of a fabric border node in a Cisco SD-Access environment?

A. To collect traffic flow information toward external networks

B. To connect the Cisco SD-Access fabric to another fabric or external Layer 3 networks

C. To attach and register clients to the fabric

D. To handle an ordered list of IP addresses and locations for endpoints in the fabric.

Correct Answer: B


New Question 13:

Which element enables the communication between guest VMs within a virtualized environment?

A. hypervisor

B. vSwitch

C. virtual router

D. pNIC

Correct Answer: B

Each VM is provided with a virtual NIC (vNIC) that is connected to the virtual switch. Multiple NICs can connect to a single vSwitch, allowing VMs on a physical host to communicate with one another at layer 2 without having to go out to a physical switch.


New Question 14:

Which two statements about Cisco Express Forwarding load balancing are true? (Choose two)

A. Each hash maps directly to a single entry in the RIB

B. It combines the source IP address subnet mask to create a hash for each destination

C. Cisco Express Forwarding can load-balance over a maximum of two destinations

D. It combines the source and destination IP addresses to create a hash for each destination

E. Each hash maps directly to a single entry in the adjacency table

Correct Answer: DE

Cisco IOS software basically supports two modes of CEF load balancing: On a per-destination or perpacket basis.

For per-destination load balancing a hash is computed out of the source and destination IP address (-> Answer \’ It combines the source and destination IP addresses to create a hash for each destination\’ is correct).

This hash points to exactly one of the adjacency entries in the adjacency table (-> Answer \’ Each hash maps directly to a single entry in the adjacency table\’ is correct), providing that the same path is used for all packets with this source/destination address pair.

If per-packet load balancing is used the packets are distributed round-robin over the available paths. In either case, the information in the FIB and adjacency tables provide all the necessary forwarding information, just like for non-load balancing operations.

The number of paths used is limited by the number of entries the routing protocol puts in the routing table, the default in IOS is 4 entries for most IP routing protocols with the exception of BGP, where it is one entry.

The maximum number that can be configured in 6 different paths -> Answer \’ Cisco Express Forwarding can load-balance over a maximum of two destinations\’ is not correct.

Reference: https://www.cisco.com/ en/US/products/hw/modules/ps2033/prod_technical_reference 09186a00800afeb7.html


New Question 15:

If a VRRP master router fails, which router is selected as the new master router?

A. a router with the highest priority

B. a router with the highest loopback address

C. a router with the lowest loopback address

D. router with the lowest priority

Correct Answer: A

Select 350-401 dumps of Lead4Pass real-time updates: https://www.leads4pass.com/350-401.html (PDF + VCE), Helping you successfully pass the 350-401 ENCOR exam.

BTW, Download More Free CCNP Enterprise 350-401 Dumps Exam Questions:

https://drive.google.com/file/d/14FtbIb6_G2tGECN_fvyVIxB7I8VqpH8r/
https://drive.google.com/file/d/1ahrnRyvF4ubbTamp6ejufmuvDDV3xA_H/
https://drive.google.com/file/d/1CzUD7IShCoh1JNUYek2Q2REVIzJprjMs/
https://drive.google.com/file/d/1UZ1OCWXuClKs73-SDQXFO8j-oA4A8a8Q/
https://drive.google.com/file/d/1fYt1qLwW_w51z4Gr4pUOqVnyab6Ioeg3/